PRODUCTS
 
 

 

CONTACT US
Mumbai

+91-9892164054

Jaipur

+91-141- 2440061

Tokyo

+81-9093758671

Poland

+48 604 530 636

 
 
MAIL US
 

 

 

 
 
 
 

Products Page - 1 | 2 | 3 | 4

Automatic Water Quality Monitoring System WPM - 108

            (Unparalleled stability, high accuracy and easy maintenance for continuous measurement of five

              fundamental indices in environmental water quality)

 Features

  • The CPU controlled system including temperature compensation allows easy and hyper-stable operation. Its measurement stability is incomparable to the conventional analog control system.

  • Maintenance has been pronouncedly curtailed as a result of effective washing method. The proven high-pressure water jet washes the each electrode with specified washing period.

 

Automatic CODmn Analyzer COD-308  

                    (COD Measuring Method with Potassium Permanganate)   

 Features

  • Adopting the boiling water circulation method enables on the same temperature conditions as JIS, this analyzer provides the most reliable measured data.

  • In addition to measured data and measured value bar graphs, it prints out self-diagnostic information in case of occurrence of a trouble.

  • Adoption of our original end-point detection method to enable derivative detection of reduction-oxidation potential ensures correct detection of end points.


Automatic UV Spectrophotometer YUV-308  

                    (Provides ultraviolet spectrophotometry which features speedy measurements, low cost and easy maintenance)   

 Features

  • While correcting the sample turbidity component and the measuring cell stain, according to the two-wavelength four-light path method, the analyzer corrects fluctuation of the light quantity to assure highly reliable measurements for a long period.

  • Conditioning of a span calibration solution can be quickly performed by the use of a calibration filter.

  • Stain on the measuring cell can be completely washed away through piston washing with rubber.

 


Automatic TOC Analyzer TOC-708

 

                    (Developed with the combustion oxidation - infrared type automatic measuring method specified by JIS fully

                     automated to measure TOC in a sample in several minutes)

 Features

  • The analyzer can be used widely for measurements beginning with 0.1 mg/L to high concentrations such as of process water.

  • Measurements can be taken with maximum six lines of samples switched automatically, since a measurement can be taken in several minutes.

  • The analyzer is designed to facilitate automatic washing of the sampling line per measurement in addition to automatic filtration sampling with a stainless steel filter.

 


Automatic Total Phosphorus/Nitrogen Analyzer TPN - 508  

             This analyzer (measures total phosphorus and total nitrogen simultaneously in an hour according to the

                  measuring method based on the Official Method of Analysis)

 Features

  • The analyzer provides measured values of total phosphorus and total nitrogen equivalent to values obtained from the manual analysis at all times, since measurements are taken according to the method based on the Official Method of Analysis.

  • The heating decomposition oven is made of ceramics of much successful achievement to withstand severe heating conditions. Accordingly, the analyzer is featured in superb temperature characteristics and can be used for a long period without corrosion.

  • In addition to printout of measured values, measured value bar graphs and others, the analyzer is provided with the self-diagnostic function to print out the instrumental trouble part, if any.

 

   

First | 1 | 2 | 3 | 4 | Next | Last

Products Page - 1 | 2 | 3 | 4

 


Copyright 2008-09, All Rights Reserved to Technos Instruments, India

Developed & SEO By Compusys