|
|
 |
|
|
|
|
| |
Products Page -
1
|
2
|
3
|
4 |
|
|
 |
Sample Conditioning Tank
System WJ-7 |
|
|
|
(For pretreatment of sample water for automatic water
quality monitoring system and performs switching of the
sampling pump flow channel and control of washing with
high-pressure jet water)
|
|
|
 |
Features
|
|
|
|
|
|
|
|
|
|
|
|
Automatic
Total Nitrogen Analyzer TN-308P |
|
|
|
(Used for purposes including labor-saved measurements of
total nitrogen) |
Features
|
-
Total nitrogen can be measured ranging from 0.01 mg/L.
The analyzer provides measured values in well
agreement with the manual analysis results.
-
Total nitrogen can be measured
within several minutes. In combination with the multi
sampling unit (MASS-5), measurements can be taken with
labor further saved.
-
The analyzer prints out measured
value bar graphs, setting conditions and other
information in addition to the measured values (CV
value and mean value).
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Automatic
Total Nitrogen Analyzer TN-208 |
|
|
|
(Used widely for measurements of total nitrogen in lake
water and industrial waste water)
|
Features
|
-
The analyzer provides highly
reliable results, since the Official Method of
Analysis has been fully automated.
-
The heating decomposition oven
is made of special acid-resistant and pressure
-resistant vessel. Accordingly, the analyzer is
featured in superb heating temperature characteristics
and can be used for a long period without corrosion.
-
In addition to printout of
measured data, measured value bar graphs and others,
the analyzer is provided with the self-diagnostic
information to print out the instrumental trouble
part, if any.
|
 |
|
|
|
|
|
|
|
|
|
|
Automatic
Ion Electrode Monitor
CN-108/NH-108/CNH-108/FLO-108 |
|
|
(Used widely as monitors of
these ions in public water areas and industrial waste water) |
Features
|
-
Cyanogen, ammonium and fluoride
ions in samples can be measured in approx. 20 min
respectively.
-
Required consumption of reagents
is little. Further, waste liquid resulting from
measurements can be drained after equivalent
neutralization. (Optional)
-
Low-concentration determinations
of cyanogen (0.05 mg/L) and ammonium (0.2 mg/L) are
possible.
|
 |
|
|
|
|
|
|
 |
|
|
|
Automatic Mercury Analyzer HGM-108 |
|
|
|
(Used
as mercury monitor to take place of the manual analyses)
|
Features
|
-
Mercury ranging from 0.05 ƒÊg/L
can be measured in approx. 10 min.
-
The zero point is corrected at
every measurement, so that mercury of low
concentrations can be measured at high accuracy.
-
In addition to printout of
measured values, measured value bar graphs and others,
the analyzer is provided with the self-diagnostic
function to print out the instrumental trouble part,
if any.
|
|
|
|
|
|
|
|
|
|
|
