|
|
 |
|
|
|
|
| |
Products Page -
1
|
2
|
3
|
4 |
|
|
 |
Automatic Hexavalent
Chromium Automatic CR-608 |
|
|
|
(Used as a chromium monitor and an analyzer to take place of
the manual analysis)
|
|
|
 |
Features
|
-
Hexavalent chromium can be measured in
several 10 minutes ranging from 0.02 mg/L.
-
The zero point is corrected at every
measurement, so that hexavalent chromium of low concentrations
can be measured at high accuracy.
-
In addition to printout of measured
values, measured value bar graphs and others, the analyzer is
provided with the self-diagnostic function to print out the
instrumental trouble part, if any.
|
|
|
|
|
|
|
|
|
|
Automatic
Total Chrome Analyzer TCR-608 |
|
|
|
(Used widely for measurements of total chromium) |
Features
|
-
The zero point is corrected at every measurement, so
that total chromium and hexavalent chromium of low
concentrations can be measured at high accuracy.
-
Total chromium and hexavalent
chromium can be measured simultaneously in a short
time.
-
In addition to printout of
measured values, measured value bar graphs and others,
the analyzer is provided with the self-diagnostic
function to print out the instrumental trouble part,
if any.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automatic
Hydrogen Peroxide Analyzer HOA-208 |
|
|
|
(Used widely for various
purposes ranging from control measurements of hydrogen
peroxide to control of waste
water resulting from washing
of semiconductors and others)
|
Features
|
-
The analyzer can be supplied for
both purposes of high concentration (g/L) control
measurement and low concentration (0.5 mg/L)
measurement.
-
The measured values are very
well correlated with those by the manual analysis.
-
In addition to printout of
measured values, measured value bar graphs and others,
the analyzer is provided with the self-diagnostic
function to print out the instrumental trouble part,
if any.
|
|
|
|
|
|
|
|
|
|
|
|
Automatic
SVI Monitor SVI-708 |
|
|
(Used
widely for purposes such as control of conditions of
treatment and monitoring) |
Features
|
-
This monitor provides measured
values of MILSS, SV and SVI well correlated with those
by manual analysis.
-
Backflow washing is conducted
automatically after negative pressure suction sampling
at every measurement. This unit thus provides stable
results of measurements for a long period without
staining the flow channel.
|
 |
|
|
|
|
|
|
 |
|
|
|
Automatic
Abnormal Value Sample Collector WS-3 |
|
|
|
(WS-3
automatically samples water)
|
Features
|
-
This unit is designed to sample
water, only when the abnormal value is kept for a
certain time. This unit is not affected by an
instantaneous alarm (such as noise).
-
Simple input of the sampling
signal allows the unit to take maximum 10 samples
automatically.
|
 |
|
|
|
|
|
|
|
|
|
